MATERIAL HANDLING
OPTIONS FROM KARDEX
Industriever
TITAN
Vertical lift storage system
10 ft. - 40 ft. tall modules
|
Maximum pan payload........................ |
600 lbs./272 kg
|
|
Maximum module payload.................. |
60,000 lbs./ 22,216 kg |
|
Maximum imbalance load................... |
N/A |
|
Minimum standard pan spacing.......... |
3 in./76.2 mm |
|
Maximum standard pan spacing........ |
30 in./762 mm |
|
Maximum pans/module....................... |
293 |
|
Minimum module height....................... |
10 ft./3.05 m |
|
System expandability............................ |
Unlimited
|
|
Control system........................................ |
Siemens P.L.C. |
|
Extractor lift chain safety factor............ |
30/1 |
|
Power requirement................................ |
460 VAC-3Phase |
|
Motor size/type...................................... |
5 HP/AC |
Other Titan features:
-
Infrared access
opening light beams
-
Parts height sensor
-
Rear or upper access
-
Remote work station
-
200/400 VAC power
system
-
Keypad relocation
-
Interfaceable keypad
-
Tab and slot frame
design
-
Ground-level service
door
-
Four-point positive
locking system
-
Exclusive "floating"
extractor design
-
Spring-loaded lift
chains
-
Sturdy 11-gauge
steel extractor body
-
Direct-reading
counting sensor
-
4x4 lift system --
four continuous-loop lift chains, two heavy-duty drive chains, direct-drive
5 HP AC motor
VERTICAL CAROUSELS
INDUSTRIEVER 3500/6000
Vertical Lifts
Three payload capacities: choose the most
cost-effective of three models
| |
INDUSTRIEVER
8,000T |
INDUSTRIEVER
12,000T |
INDUSTRIEVER
16,000T |
|
Max. payload per pan |
200 lbs / 90.7 kg |
300 lbs / 136 kg |
500 lbs / 226.5 kg |
|
Max. payload per module |
16,000 lbs / 7257 kg |
24,000 lbs / 10,884 kg |
25,000 lbs / 11,337kg |
|
Power Requirements |
208 / 220 VAC |
208 / 200 VAC |
208 / 220 VAC |
|
Motor size/type |
2.25 HP DC |
2.25 HP DC |
2.25 HP DC |
|
Vertical travel speed |
132 ft / min |
132 ft / min |
65 ft / min |
HIGH DENSITY MOVABLE SHELVING
-Double-flanged wheels and self-adjusting pillow block bearings
guarantee continuous alignment for smooth, consistent performance day in and day
out.
-All wheels are a full five inches in diameter and all are driven to maintain
positive tracking and deliver a long, worry-free operating life.
-Full-length drive shafts prevent the racking and friction common with other
movable shelving systems.
-Flexible rail system options allow hassle-free installation in new
construction, existing structures and even temporary or leased facilities.
-Choose from electronically controlled, mechanical assist and manual systems to
meet your specific needs most cost-efficiently.
Photo above:
Installation:
police department. Application: case evidence.
Photo right,
center:
Installation:
insurance. Application bulk storage.
Movable
Rack Storage Systems
Mechanical
override permits continued operation in the event of a power
failure.
Fixed-range
capability keeps range stationary for multiple aisle use, safely
increasing productivity.
Warning horn
wounds 3 seconds before rang movement begins and continues
intermittently throughout movement.
Warning light on
every range signals movement of any range.
|
Safety
beam-electronic eye at each aisle entrance stops carriage movement
when activated. (See illustration key a)
All wheels are
driven by a full-length drive shaft for smoother operation. (See
illustration key b)
Dependable
heavy-duty motor insures years of maintenance-free operation.
(See illustration key c)
All load weight
distributed directly over wheels, maximizing weight capacity.
Exclusive safety
bypass permits safe uninterrupted operation. Prevent costly
downtime. Requires two people for complete safety.
Entire system can
be locked to prevent unauthorized access.
Photoelectric
sensor slows range movement as aisle closes; no bumper arm
projecting in aisle.
|
|
documation,
inc.
Electronic Control Panel: Integrated
microprocessor controls choose shortest route to selected shelf
Maximum load per carrier of 600 lbs
Upper and lower safety bar
Infra-red safety eyes
Safety status panel
Optional full width fluorescent light
Four-point tracking in the arc allows for maximum
carrier support
Freestanding end frame allows greater unit
payload capacity
Variable Speed DC drive allows optimum efficiency
Handcrank allows manual operation of the unit